Best selling wood projects - A Simple Utility Tray Project Part 3

Best selling wood projects

 Whod a thought  -  a tray in three parts!
My kids are always commenting on how long it takes me to do things .... now I know what they mean.
OK here we go.

I have decided to prepare the boards for the bottom of the tray so that they snug into each other with a ship-lap joint. This will eliminate gaps in the timber. The  boards could just as easily been edge joined, but I prefer this.

Any rebate plane with a fence will do.  This is a Stanley 289 with a skewed blade.

The side boards need some dressing as well.  To round over the top edge of these two boards, I am using an old wooden beading plane. Easy as pie to use, and gets the job done in super quick time as well.

These old planes can be found around the markets very cheaply - most people prefer to use an electric router these days.  Beaders like these have the advantage of being carbon neutral, and cordless!  Furthermore, there is no noise and no dust.

They work best in softwoods, and this oregon is a piece of cake to work.   The rounded edge is technically a nosing, but the beading plane does the job well enough.
See:

Fixing the bottom in place requires a bit of trial and error fitting, until the boards are just right all the way around.

Once happy with the fitting, they can be trimmed to size and laid out for nailing.

I left the middle two in place, and scribed a line to mark where they touched the bottom of the sides .  Important step this - as you cant see through the timber.

Put the two outside timbers back, and continue the line onto them as well.

The nails are flat headed and these have been bronzed.  Makes them look back-counrty authentic, and in keeping with the style of the tray.

All of the joints are glued as well as nailed.

The ship-lap of the base is clearly visible here.

Make a feature of the row of nails that hold the handle in place at each end.

And - here it is.

One utility tray.

Might be a little large for the kitchen, but would not look out of place collecting vegetables from the garden.

It can also be used in the potting shed, in the workshop as a tool tote - ala Roy Underhill, or even as a toy tray for kids or the family pet.  Great for soft toys or lego blocks.

If youd like to make one of these, go right ahead.  Add to it, or change it to suit yourself, and have fun doing it.

Happy woodworking to all ....
Best selling wood projects

Read More..

Best selling wood projects - On Any Sunday

Best selling wood projects

Across the country, Sundays are market days in villages, towns and regional centres. Our local area has several markets - spread between Saturdays and Sundays, but it is the Sunday markets that I most enjoy.

Country cooking, preserves, fresh fruit and vegetables, plants and seedlings, bric-a-brac, and all importantly - old tools, are the temptations that keep me coming back most weeks.

One of the most enjoyable aspects of any community market, is the community that it represents and serves.  We often run into our friends here, or organise to meet, and have come to know the vendors very well over the years.

Theres Will, the banana and avocado man - here every Sunday come rain or shine.  One really wet weekend that washed out everyone else, Wills van was the only stall - surrounded by water - and his regular customers all turned up as usual.

Jack is an amateur woodworker who spends his week constructing, and Sunday selling.  A bit of everything on Jacks stall.

The military men have everything from militaria to old coins and collectors cards.

What would a market be without the purveyors of fine junk.  Treasures are there to be found - you sometimes have to dig for them though.

Then theres my old mate Ross, who started these markets 25 years ago and hasnt missed one yet.  The tools here are well priced, and it is sometimes hard to find a bargain - but not always.  However ..... if you want a particular tool, there is no one more likely to have it.  If he hasnt got one, hell have one for you next week.
He never writes it down - and he never forgets.

Markets folk are the salt of the earth, with a little bit of pepper - just to make things interesting.  People, whose word is their bond, are more common here than almost anywhere else.  The world is a better place because of them.
Sunday mornings - markets, a coffee with loved ones and friends, a spot of shopping, and if lucky - catch up with family and grandkids............
Does it get any better than this!
 Happy days ..............
Best selling wood projects

Read More..

Best selling wood projects - An Elegant Jelly Cabinet

Best selling wood projects

What the .........?????

Who stores jellies in specially made cabinets these days?  Maybe the Amish, the Mennonites or any would-be-Shakers, but - apart from them ...... well?

Fortunately this cabinet wont be storing jellies, (we call them jams in Australia), but will be utilitarian enough to be turned to many purposes.

I have been looking at numerous styles of antiques for the kind of cabinet that I want to build.  Unfortunately, none of them hits the mark, but between them - all the pieces of the cabinet puzzle are present.

Let me explain.

The cabinet will be narrow in proportion to its height - like this one.  However, it wont be so tall - only around four feet high.

It will have one door - not two.

These doors are solid, and even though they are not made out of plywood, they look as though they could be. Not a pretty look.

This cupboard is useful, but it lacks elegance, and scores poorly aesthetically.

Here is a wall mounted cupboard with only one door.

The proportions are again wrong, but the door is similar to what I want mine to look like.  I wont paint mine.

Frame and panel construction for the door, looks so much nicer than the slabby appearance of the former cupboard shown above.

I dont like the way that this door has been framed by the front of the cupboard.

The top and sides are OK, but the bottom looks unfinished, and the door seems to hang in the air (which, of course this one does - but you know what I mean).

The framing of the door needs a bottom rail.  This will serve two purposes - beauty and practicality - ie it will look good, and add strength to the construction.

Now this is better.


The door is wrong, but it is at least framed, and looks better from that perspective.


The bottom stile is too narrow, and doesnt match the top stile in any way.

 Sitting flat on the floor like this, also makes this cupboard look squat.

The addition of some short legs will make a huge difference to the appearance.  They will also be practical - allowing airflow underneath.

After all the wet weather we have been having, improved airflow will be a big plus.

Heres a good example of the leg height I am after.  Pity about the cabinet.

Some antiques have well and truly lost their beauty along the way.  The years have not been kind to this one.

Now, none of these cabinets have the grace that I am after, and they are all too wide for their height.  I shall have to remedy that in my design.

What each of them does have, is one ingredient that will be utilised in my final cupboard.  I just have to put them all together, and hope that the finished result matches the idea in my mind.
Sounds like fun doesnt it.

Next step will be to find some timber, then .......
..............let the games begin!

Best selling wood projects

Read More..

Best selling wood projects - A Simple Utility Tray Project Part 2

Best selling wood projects

Once the outline of the first of the ends has been defined and cleaned up, the shape can be copied to the other end - and the process repeated to make both matching end pieces.  Dont worry about the tapered sides just yet - well get to them later.

The centre handle, that was glued up from two pieces, has dried - and is ready to be shaped and have the handle hole cut.

I use a drill to give me a starting place, and cut again with the coping saw.

Of course it would be much faster with a powered saw.  A jigsaw or a scroll saw would work, as they can be inserted through the holes.

For the curves across the top, all of these saws will work well - perhaps a bandsaw with a narrow blade, best of all.
Since this project is one that youngsters might be making, Ill stick to hand tools.

The handle shape is my own design, worked out with the pair of compasses shown.

You can design it to be as simple or as fancy as you like.

This shape has turned out quite well and pleases me.  I took the trouble to make a template from it on a piece of scrap MDF.  Ill save this, and use the design again for other projects in the future.

The curves all need finishing, and the harsh edges softened.

I like to use a spokeshave, but sandpaper can also be used - along with rasps and files if you have them.

Time to set out the dadoes - which will be cut into the insides of both ends to house the handles.

To be accurate, the thickness of the centre handle piece needs to be measured first.

I find it easiest to mark the centre line of the ends, and measure half the thickness of the handle on either side of this centre line. This keeps things nicely middled.

These are cut to form the dado in the next step.

My trusty Spear & Jackson does the honours, being careful to cut inside the marked lines.

The left side cut has been completed,  and the second cut on the right is nearly there.

This waste has now got to be removed.  I use a chisel, and to prevent tear out at the ends, I chisel from each end towards the middle.

For this step the workpiece needs to be held firmly in place.

A couple of clamps with scraps for padding work well enough.  These stop the clamps from marking the face of the timber.

The bottom of the dado needs smoothing, and this can be done in a few different ways.

Once again I have chosen a chisel - a long handled paring chisel this time.  A hand router, like a Stanley 71, would work even better than this.

The sides of the dado need trimming as well, so that the handle will be a snug fit.

Side rebate planes are made for this job, and excel at it.

Side rebate planes come in a variety of different designs, and are still produced by several plane manufacturers today.

Mine is a right handed plane, that was made by an unknown craftsman years ago.
It has a rosewood body and a steel skate that houses the blade.

It is an absolute joy to use - my only regret is that I dont have the left handed version to go with it.  This is sometimes needed when the grain runs in the other direction.

The angle at which the handle engages the ends, is one of personal choice.

The picture of the antique tray in the first post, shows a much shallower angle than I would like.

I decided this angle by trial and error, until it struck a line that I liked.

I locked in this angle on the skew bevel, so that it could be used on the other end, and to create the slope on the two end pieces as well.

With all these pieces cut, and the dadoes snugging up to the handle, it was time for a trial fitting.

Not much further to go now.  The two side pieces will be cut to match, and then the bottom will be attached.

These will appear in part 3.

Starting to look pretty nice I think.

Happy woodworking to all .......

Best selling wood projects

Read More..

Best selling wood projects - A Simple Utility Tray Project Part 1

Best selling wood projects

 

Here is a little project that can be completed in a weekend, requires a small amount of timber and can be finished with simple tools.  It is an ideal undertaking that can be shared with children, or even accomplished unaided by a child, or anyone with basic woodworking skills.

Either way, it is fun, and produces a stylish tray that can be used in the dining room, the garden, the potting shed or the workshop.  It is based on a traditional tray like this one from New England - USA, but is most likely English in its origins.

Im going to use found and re-cycled materials for my tray, and they will require some cleaning up, squaring and truing, and for all of the parts, some re-sizing.

Using re-cycled materials is cheap, and environmentally responsible.  Furthermore, old timbers look great in this context.

When using re-cycled timber, it is important to clear them of nails and grit that can damage your tools - and dent the cutting edges of planes, saws and chisels. A wire brush is useful here.

Ill need a centre handle, two ends, two sides, and some material to fashion the bottom of the tray.

It is always a good idea to set out the timbers that will be used, and label them so that no mix-ups occur.

I find that chalk is the best medium  - forty five years of teaching does that to you.  I think I must have chalk dust in my blood by now.

My grand children introduced me to sidewalk chalk - thick and chunky, and available in most $2 shops!

Whatever timbers are chosen need to be light, so that carrying the finished tray isnt a burden.  Pine is a good choice.  I am using radiata pine and oregon (douglas fir), since I have these already.  The radiata is particularly rough, and these edges need dressing.

Plane in the direction of the grain - I use a jack plane first, to remove the rough, then a jointer plane to ensure that the edge is straight, without round or hollow, and square.

I dont have a board wide enough from which to make the centre handle, so I will have to edge glue two boards to create enough width.  Both edges need to be straight and square - a very slight hollow (called a sprung joint) helps the gluing process.

The jointing is complete when a full length shaving is taken by the jointer plane.  The center handle section is clamped between two cawls, and excess glue cleaned up with a damp cloth while the glue is still wet.  This section can be put aside to dry while the other parts are fashioned.

The two ends will be curved across their tops in this design, but can really be any shape, as long as there is enough support for the center handle section that will run longways down the tray, dividing it into two.

Any suitable saw can be used to cut the curve.  Here I am using a coping saw, but a jigsaw, scrollsaw or bandsaw would be quicker.

Cut outside the lines and shave or sand back to the desired curve.


I thought that I would post this project as one listing here on the Village Woodworker, but life has had other plans for me. There will have to be a part 2.
In Part 2 Ill make the centre handle, and assemble the tray before adding the base.
Cant wait!

Happy woodworking to all ..........

Best selling wood projects

Read More..