Best selling wood projects - Building a Ukulele Part 7A Body Assembly continued

Best selling wood projects

Yes, I know, glaciers move faster than this, yet things are happening.

Somewhere under all those clamps is the back of the ukulele attached to the body, which is held in the mould.  Use your imagination.

 

Here it is after the glue has dried - and before the edges are trimmed off.  As you can see, I have given the inside of the back a couple of coats of shellac to seal it. 

I will do the same for the inside of the top, and the interior of the body, before the top is fitted.  

I am hoping that by sealing both sides of the timber, I wont have as many issues with seasonal  timber movement.

Here is the back in all its glory - after trimming the edges.
Things are starting to look encouraging.

The linings for the top are attached in the same way as those on the bottom - good old clothes pegs!
Here, I am planing the linings level with the sides.  The top is flat, and I dont want any sticky-uppy bits in the lining to spoil it.
Some parts of the lining drifted upwards on the slipperiness of the glue before drying - no problem, easy fixed with the Lie Nielsen 101 small block plane.  This is such a good sized plane for this job, when even a regular block plane would be too large.

OK, the neck has to be fitted before the top goes on, so that I can get clamping room - to hold it while it dries.  The second reason is simply that the top gets glued over the heel block, and the neck tenon.
Here is a trial fitting.
That little piece of raised tenon has to be removed, while the neck is raised to the level of the finished top.  This is important, because the fretboard is glued on top of both - and they must be in the same plane.

Next step will be to glue the neck in position, before adding the top.
Starting to get exciting, isnt it!

Thats all for now, the glacier needs to rest.
Love life and live ...............
Best selling wood projects

Read More..

Best selling wood projects - Building a Ukulele Part 9 Body Fretboard and Finish

Best selling wood projects

Things are coming together nicely now.
The top is glued in place, and I have finished the trimming around the edges.

The body is assembled, the bridge attached and the fretboard taking shape and ready to glue to the neck.

Here is a trial fitting of the unformed fretboard before shaping.
 

Shaping is easily done with a block plane.  This is my Stanley number 18.

 Here it is after shaping, in a trial fitting.
I will finish the dot markers and fretwires before gluing this to the neck and body.

 In a moment of vanity, before the top was glued in place,  I decided to label my ukulele - and I have a notion of building more - so I gave myself a brand name - Riverside Ukuleles.
Seems appropriate for the Village of Telegraph Point, as we sit right beside the Wilson River.

After installing the mother of pearl dot markers and the side markers, the fretwires will be on and the fretboard ready to go.
I have found a very cheap and plentiful supply of side fret markers from the local markets - old knitting needles.  Just the right size and they can be cut to button length easily.

I am going to attempt a shellac finish on the soundboard and the body, and the old hands at the Hastings Woodworkers Guild tell me it will take many, many coats.

The western red cedar top is quite soft and needs hardening for protection, so I am hoping that the shellac finish will be appropriate.  Before this, I will tape the bridge and the end of the neck to protect them from over spatter, and fill the sound hole for the same reason.

Enough for the moment.
More next time .......

And happy woodworking to all ...........................
Best selling wood projects

Read More..